20261116 George Hull Concept Spinner

20261116 George Hull Concept Spinner

The Original Blade Runner came out in 1982 to show the World as it was imagined to be for 2019. And then, in 2017, the 2049 was revealed. The former took me more than 3 decades to realised its significance in MY own World of SciFi. And now, with the 2017 Movie, which felt a little like a distance 3 weeks ago, I am wondering what is going to happen…

Honestly, if you asked me about the two Movies, I have no idea what it was all about. In a nutshell, I have to sum them up as some Cop or ex-Cop (like those 80’s – 90’s Movies) chasing and killing artificial people known as Replicants, while moving around in flying cars, and using badass guns.

20261116 George Hull Concept Spinner

The George Hull Concept Spinner

The Conceptual Artist George Hull has designed some Spinners for the 2049 Movie and 2099 Series. There was one design, which mostly resembled a Police Unit, was not utilised in the Movie. And when I took a look at it, it was quite beautiful. Alas, it is not available as a plastic injection kit but either as a resin or a 3D digital file, depending on which source you’re going for.

The first was by Tony Celliers‘s Dynamic Digital Creations based in South Africa which comes as a USD330, 1/17th scale resin kit. The second, is by Colin Catchpole‘s Bigbangcollectables which is about 1/15th scale and is soon to be released as a Digital File on Etsy as of 16 Nov, 2026.

No, this is not it.

BBC vs DDC

So, which Spinner would you be going for? On the left, we have Bigbangcollectables (BBC) and on the right, we have Dynamic Digital Creations (DDC). So, for the time being, here is what’s out there:

BigbangcollactablesDynamic Digital Creations
Scale1/151/17
Material3D Print (I don’t have a printer)Cast Resin (everything is there)
PricingTBA (soon)USD330
Design-wise, both kinda looked almost spot on. BBC’s front mandibles are lighted on both sides while DDC’s inner mandible does not (so that you do not get distracted with lights reflecting back during rain?). If you look at the front pair of orange (lit?) rectangles, BBC follows very close to George Hull’s design but DDC’s pop-out details are much better.
I kinda like BBC’s rear corner red light detail while DDC stuck very close to the Concept Design. From this angle, BBC’s rear looked shorter and higher while DDC is kinda more streamlined (I don’t know what I am talking about). Not only that, the upper rear assembly on the DDC is much lower plus, its rear wing-like sides looked very good. If you liked Officer K’s Peugeot, the rear of DDC is followed that design plus, if you followed Randy Cooper, the casting on the clear rear lighting is beautiful. The design here is more in line with K’s Peugeot Spinner and both design utilises the three-wheeler idea.
BBC’s front dash uses a ‘steering wheel’ idea which is nice. Again, like K’s Peugeot, DDC’s interior on the screen arrangement is very much almost similar.
Looking at the rear again, BBC’s roof mounted weapon looks the business and could move. Also, it has a small antenna which I suppose, could be lit despite it being potentially fragile.

What about the lighting?

To be frank, unless I have a copy from either sources, I would not be able to move forward. Most of the lights, apart from the Siren, are static so, it is just a matter of finding the right LED colour and effect to suit your needs. For the siren, I do have some idea but that’s it; just an idea. I just love the three small orange (blue?) lights on the sides and also, the pair of orange ones at the front mandible. Last but not least, the yellow band at the sides ala 2019 Spinner which is cool if they flicker like a slow flip-flop (and fading like a bulb). Unlike K’s Spinner, there are no red strobes on the upper surface of each Spinner.

And lastly, I would like to see BBC’s undercarriage. But I would have to make a guess that both does not have lighting underneath, which would be great for, ‘Artist Interpretation’ for Navigational strobes and other what-nots.

Which would I choose

First and foremost, I do not have a 3D Printer. Secondly, USD330 is a lot of money which, can be quite significant chunk out of my Monthly salary. So, if I have to make a choice, my choice is this…

I mean, this is the only Spinner I could afford after months of, um, savings?
Posted in 2049 Spinner, 3D FIles, 3D Models, 3D Printing, A Piscean Works Blog, Blade Runner, Cars, Design, Electronics, Lighting, Microchip PIC, Microcontroller, Printed Circuit Board, Programming, Resin, Resin KIts, Scale Lighting, Scale Models, Sci-Fi, Spaceships, Spinner.

Leave a Reply