The Fujimi 1/24 Blade Runner Spinner Project I got my Fujimi 1/24 Blade Runner Spinner seven years too late after its 2011 release. But thanks to HLJ.com, I made sure I was not left behind during Fujimi’s second run. Being this late meant I missed out on the ‘Special Edition” which comes with a non-scaled […]
Category Archives: Fujimi
20260729 The End of Stevens International
The news of Hobby Shops closing down or just up and left has become more common in the last few years. News that I do not care for much since it does not affect me in where I live although I secretly wished I was there at their Sales. But news about the 50-year old […]
20260101 Spinner: Front Mandible PCB ver 03 3mm Spacer it is!
Happy New Year! I have located the 3mm White LED and soldered onto another prototype PCB. This time, I have not modified the 3mm spacer but just used it as it is. Instead of the 10mm height I envisioned, my calipers said the height should be around the 9mm mark. This means, with the spacer, […]
20251231 Spinner: Front Mandible PCB ver 03 LED Spacer
Are you high? A typical height of a 5mm LED is 8.7mm (1mm collar and 7.7mm resin lens). Add that to the 3mm spacer, we’re looking at a 11.7mm height. But as shown above where the 0mm height LED position looked more accurate, lets have a brief calculation about the 3mm LED. Its typical height […]
20251208 Spinner: Front Mandible PCB ver 03 Testing
JLCPCB & being (almost) Perfect I always liked to use JLCPCB which apart from their manufacturing speed, their Call Centres are very responsive when it came to troubleshooting my designs. However, I also wished that they could help modify my PCB and/ or 3D files too but sadly, that is not possible. I mean, if […]
