With nothing much on my plate today, I decided to have another look at the Engines while the revised PCB are on its way. This is because the current board had a missing link to the power rail. Plus, since I have connected the 5mm LED to WW1, the sixth solder pad is free which […]
Category Archives: Electronics
20230301 The Razor Crest Engine Flicker
OK, so I am not working anymore. So, after sulking the whole morning, it was time to do something while searching for a new job. In the meantime, I decided to take a look into the Razor Crest lighting sequence again. ANOTHER TUNE-UP I have made some changes to make the engine flicker a little […]
The Blade Runner Spinner lighting effect courtesy of Marcuss Nicholls
I still love this lighting effect. This was taken from the 52nd Shizuoka Hobby show in 2013. I hope to get my Spinner built with the same effect too. The only difference is that the revolving lights would have a flash, the five rectangular lights would be more randomly sequenced and the central light would […]
20230221 The DIY Programmer Adaptor Video
I created this in 2022 and have been planning to make a video.Normally, I would start off by creating the prototype circuit on the prototype board and at the same time, start creating the program. Sometimes, the problem starts when I do not have the correct components for the prototype board and I would have […]
