20261122 Lighting for the Bellfine Blaster Pt.01

20261122 Lighting for the Bellfine Blaster Pt.01

In anticipation to the release of the Bellfine Blaster, I am redesigning the Lighting system a little. Whether it can come to Malaysia is another question. I have been looking at the design from another perspective in the hopes that it can be installed in other Blasters.

The Source of the Bellfine Blaster (aka The Takagi Blaster)

Here is a little bit of History about the Blade Runner PKD Blaster. From macky2019‘s (Koichiro Makino) blog, we know that it was originally from Ryosuke Takagi of Takagi Blaster (as sold by MULE long ago) and not from Carl Tate. This is a very detailed History and I am glad Bellfine is using Takagi-san’s efforts and turn it into reality.

Koichiro Makino‘s Blog

If you wan to know everything about Blade Runner and the Scale Models, this is THE Blog to read from. Do note that if you’re looking for a very nice 1/24th scale figures for your Fujimi 1/24th Spinner, he is the person to look for. Unfortunately, it is quite difficult to get them as they are sold out very fast, especially on HLJ. I had to get mine from Mandarake and that was because I was lucky. So, do visit Makino-san’s Blog as often as you can.

20261122 Lighting for the Bellfine Blaster Pt.01

This is not a confirmed design as all I did was to make sure the LEDs are able to ‘adjust’ to various dimensions of different Blaster designs. I might want to make it a little more ‘flexible’ but without actual ammo clip such as from a Tomenosuke or other designs, this is just an exercise in design. I can do with some measurement but at the end of the day, I would still need to test fit the board. Ha ha.
Posted in 2019 PKD Blaster, A Piscean Works Blog, Bellfine, Blade Runner, Blaster, Computers, Design, EaglePCB7.77, Electronics, JLCPCB, Microchip PIC, Microcontroller, Model Kits, Printed Circuit Board, Programming, Sci-Fi, Weapons.

Leave a Reply