While trawling through my JLCPCB account, I came across this notification dated April 1st. They are now able to to multilayer silkscreen which in other words, you can now put images on your PCB. I have seen some earlier designs from microcontrollers (Arduino?) but they used them sparingly to only mark the I/O pins. Designing […]
Category Archives: Scale Lighting
202040408 1/6th Proton Pack: The Guesstimation Process
Fitting a circuit board into a scale model is quite challenging and it usually ends up being a bespoke design. The challenge is to maximise the space within and making sure all the components fit in there. So far, in most scale models, I can skip this process because the available space was more than […]
20240217 Razor Crest Main Board Rev.05
After more than about 10 days, the newly re-deisigned (and I hope, the final version) of the Razor Crest’s main board has arrived. The circuit is the same except that it has been re-wired slightly to fit into the new screw terminals. To make or rather, allow for last-minute re-soldering, I have moved the components. […]
20240201 Razor Crest Main Board PCB Revision 5
HAPPY NEW YEAR 2024 A month has passed by and before I knew it, its already February. I was quite busy with my Day Job since December and so, I had to put a lot of things away for obvious reasons. I was hoping to start with calculating and planning for the production of the […]
