THE FINAL REVISION After taking a closer look at the 3D printed TR-595E’s body, I believe I can mount this PCB flat-faced. In other words, only the LEDs are on the upper side of the PCB and they can fit into the already pre-made windows. All I have to do is to just relocate the […]
Category Archives: TR-595E
20220710 The Height of the Relay
With the 3D part in my hand, one of my questions has been answered. The height of the relay is just a smidgen shorter than the uppermost ledge which is about roughly 5mm. These ledges are responsible for the Lower Interface panel not dropping into the whole cavity. The 5mm height limit is quite a […]
20220703 The Modified TR-595E Decals
Today is Sunday, and after personal some reflection plus its hot as heck here, I took another look at the decals. There was something nagging at the back of my mind; The TR-595E’s original front sensor array decals did not have the two white oval-like details for the pair of alternating green LEDs in the […]
20220629 The TR-595E Lower Interface modifications
It’s getting there but I am not sure if my method worked until this design becomes a reality. I mean, there are so many ‘good lucks’ when I was doing it and, well, this is too good to be true. But today, which was the very next day, my Luck changed. For the very first […]
