During a discussion with one of my Friends, we touched on the subject of the white wire located on the left side of the blaster. In the olden days, it was thought to be something else but now, we know what it was. After close to two decades, the original Blaster was revealed at Worldcon […]
Category Archives: 2019 PKD Blaster
20240802 Lighting for the AndersFP Blaster Pt.08
You know, I was supposed to get this version 5.01 out by last weekend but I did not. This was because in the Forum, some did ask about if the PCB can be used in a Tomenosuke Blaster. At that time, I was not too confident about this after a short chat with another Blade […]
20240726 LIR2032 vs CR2032
The normal PKD2019 For the Project of lighting up the Blade Runner blaster, I was counting on using the CR2032 coin cell battery to light up the red LEDs. The reasoning was due to the red and green LEDs whose forward voltages were 1.8volts and 2.2volts respectively. But after some time, when the voltage nears […]
20240715 Lighting for the AndersFP Blaster Pt.07
After a conversation with a friend who is a Blade Runner fan a few night ago, he offered to print the screwdriver part for me. Initially I was offering him a full working prototype if the lighting but he declined. And suddenly, he came and passed me the two 3D prints! We had a nice […]
20240710 PKD2019 & Ghost Boards
The PKD2019 Board I am using the 4.01 Board which arrived from JLCPCB last month. The board is a good fit and the modified left LEDs used to secure the board works. After playing with it for a while, I realised there is still a lot of memory in the chip. This means I can […]
